Eleaf iStick TC 40w 2600mah with GS Tank Kit

  • £34.99
  • Ex Tax: £34.99
  • Product Code: M00001378
  • Availability: In Stock

Available Options

QUICK OVERVIEW

40W Eleaf iStick TC Mod , is the innovative temperature control iStick from Eleaf. Both TC-Ni and regular VW mode available with max 40W output. It comes with GS airflow control atomizer, ni 0.15ohm coil pre-installed.

 

Product Introduciton

40W Eleaf iStick TC Kit with GS TC Atomizer, is the innovative temperature control iStick from Eleaf. Both TC-Ni and regular VW mode available with max 40W output. It comes with GS airflow control atomizer, ni 0.15ohm coil pre-installed.



Parameters

40W istick battery:

Battery size: 21X35X82mm
Wattage output: 5-40W
Max output voltage: 8V
Minimum resistance: 0.05ohm(VT mode), 0.15ohm(VW mode)
Temperature range: VT mode 200~600 F or 100~310C


Package Content of Full Kit

    • 1 x 40W Eleaf iStick TC battery

    • 1 x USB cable

    • 1 x 510-eGo adapter

    • 1 x user manual




Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Operation Guide:Power on/off: press the fire button five times in quick succession to turn it on. In the same way, it can be turned off.

Vaping: long press the fire button to take a puff.

Stealth on/off: press the fire button and down button simultaneously when the battery is on to switch between Stealth on and Stealth off mode. In the Stealth on mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting.

Switch display mode: keep pressing up and down button simultaneously for two seconds when the battery if off, the screen display will rotate 180 degrees.

Shift between TC-Ni and VW modes: long press the menu button to shift modes.

How to charge: The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. It can be charged with the USB cable through the USB port at the bottom. It will take about 3.5 hours to get a full charge via 1A wall adapter.

How to add liquid: Screw the base off atomizer firstly; Slowly refill the liquid into the two small holes along the tube. Pay attention don't add liquid into the air pipe and do not overfill, leave a small air pocket in order to avoid leakage.

Write a review

Note: HTML is not translated!
    Bad           Good